The Volume page calculates the volume of one survey against a flat reference plane: how much ground lies above it (cut) and how much space lies below it (fill). It is the first page you see when you open Topo.
- Pick a survey in the Surveys list on the left. DSM marks a survey with a surface model. Otherwise the row shows the number of GPS points.
- Under Settings, choose the Reference plane:
- Lowest point, Highest point or Mean height: a plane at that height of the survey, or of the cell when you clip to one.
- Custom height: a plane at the height you type in Base height (m), for example the bottom of a cell.
- Under Clip to, choose a landfill cell to measure only the ground inside it, or Whole survey. A surface model is measured over the landfill cells only: choose a cell or All cells.
The figures update as soon as you change a setting.
- Cut · above base: the volume of ground above the reference plane.
- Fill · below base: the volume of space between the ground and the reference plane, where the ground is below it.
- Net · cut − fill: cut minus fill. The line under it says whether there is more cut or more fill.
- Footprint: the area measured, and its share of the cell when you clip to one.
How it is measured. With GPS points, the surface is made of triangles that join the points. With a surface model, the volume is measured on the server from every pixel inside the cell, which is more exact.
Under the figures, the Surface view shows the ground in 3D, coloured by height. The reference plane is marked in the legend. When you clip to a cell, a chip says which one.
With GPS points, the part of the cell the survey does not cover is hatched. Its area is in the legend, and it is not in the figures.
See The 3D view for how to turn, zoom and light the surface.
The line under the view gives the details for anyone checking the calculation: the coordinate system (EPSG code), the number of points and triangles or the pixel size, the lowest and highest height, the mean height, the height of the reference plane and the surface area.
Click Save result at the top right to keep the figures with the survey, the reference plane and the cell they were calculated for. Everyone on the site can see saved results on the History page.
When this result is already saved, the button is replaced by Saved. Point at it to see who saved it and when.
- No GPS points or surface model: the site has no survey Topo can use. Add GPS points or a surface model to a survey in the Surveys module.
- This survey has fewer than three points, which is not a surface: the survey needs at least three GPS points.
- This survey has no points in a metric coordinate system: import the survey again, and choose its coordinate system when you upload it.
- The surface model has no heights inside this cell: the surface model does not cover the cell. Choose another cell or All cells.