The water map shows your site's water samples on the map, coloured by value. It is the first page you see when you open Water.
Each dot is a measurement point. The number on the dot is its value for the parameter you chose.
Use the bar at the top of the map:
- Daily, Weekly or Monthly: how samples are grouped in time.
- The arrows and the date: step to the previous or next date that has samples, or pick a date from the list.
- The parameter list: the value the dots show and are coloured by, for example Water height (m). It lists the parameters measured on the chosen date.
The legend at the bottom shows what each colour means. Without limits for the parameter, the colours follow the date's own values and the legend says "no limits set". The switch turns colouring on or off, and the arrows button flips the colour ramp.
The Layers panel on the left has three tabs:
- Water: the samples layer, with the number of points that have a sample.
- Assets: the site's asset layers, such as wells and pipes.
- Basemap: the background map.
Each row has a switch to show or hide the layer. The T switch shows or hides its labels. Hide all hides every layer. Save view keeps the current map position and zoom.
Click a dot to open the Water sample panel on the right. It shows the point's name, the period, the date and the value you clicked.
- Trend: a chart of the point's values over time. Choose the value under Parameter, add a second one with Compare with, and set how far back with 1D to All. For a well, the Well profile under the chart shows the water level in the well, in metres below ground.
- Sample: every value of this sample.
- History: all samples at this point, newest first, one column per parameter.
- Provenance: where the sample comes from, with its date of sampling.
- Point: the measurement point and its asset, with the number of samples and the date of the last one.
At the bottom of the panel, Open sample opens the sample on the Samples page, and Open asset opens the asset's page.